Minimum blue intensity is a reflected light imaging technique that provides an inexpensive, robust and reliable surrogate for maximum latewood density. In this application it was found that temperature reconstructions from resin-extracted samples of Pinus sylvestris (L.) from Fennoscandia provide results equivalent to conventional x-ray densitometry. This paper describes the implementation of the blue intensity method using commercially available software and a flat-bed scanner. A calibration procedure is presented that permits results obtained by different laboratories, or using different scanners, to be compared. In addition, the use of carefully prepared and chemically treated 10-mm-diameter cores are explored; suggesting that it may not be necessary to produce thin laths with the rings aligned exactly perpendicular to the measurement surface.
You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither BioOne nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the BioOne website.
Vol. 67 • No. 2