Translator Disclaimer
9 September 2019 Structural Characteristics Analysis and Optimization of Large Hydraulic Press Water Control System for Marine Engineering
Mei Sun, Chengyan Zhang, Chaoyi Xie
Author Affiliations +
Abstract

Sun, M.; Zhang, C.-Y., and Xie, C.-Y., 2019. Structural characteristics analysis and optimization of large hydraulic press water control system for marine engineering. In: Gong, D.; Zhu, H., and Liu, R. (eds.), Selected Topics in Coastal Research: Engineering, Industry, Economy, and Sustainable Development. Journal of Coastal Research, Special Issue No. 94, pp. 332–336. Coconut Creek (Florida), ISSN 0749-0208.

With the development of science and technology and the construction of offshore oil platforms, the optimization of water control systems for large hydraulic press has become an inevitable trend in marine engineering research. Combining with related theories of mechanical engineering and marine engineering, and numerical analysis method, this paper adopted the finite element analysis software ABAQUS to establish numerical models for the water inlet and outlet valves of the hydraulic press, it simulated and analyzed the flow field state of the valve port under different fluid pressures and spool displacements, thereby studying the structural characteristics and optimization of the hydraulic press water control system. The results showed that when the fluid past through the inlet valve, local low-pressure zones appeared at the inlet valve port, and the low-pressure zones inside the inlet valve port increased with the increase of the spool displacement; the fluid pressure had a certain degree influence on the flow performance of the inlet valve, under the same spool displacement, the fluid flow increased with the displacement of the inlet valve spool; the speed increase of fluid flow past through the outlet valve gradually increased with the increase of the displacement of the outlet valve spool, the fluid pressure of the outlet valve increased first and then decreased as the displacement of the spool increased. This study provided technical support for the application of hydraulic press in marine engineering and laid a theoretical foundation for the structural optimization of hydraulic press.

©Coastal Education and Research Foundation, Inc. 2019
Mei Sun, Chengyan Zhang, and Chaoyi Xie "Structural Characteristics Analysis and Optimization of Large Hydraulic Press Water Control System for Marine Engineering," Journal of Coastal Research 94(sp1), 332-336, (9 September 2019). https://doi.org/10.2112/SI94-068.1
Received: 15 February 2019; Accepted: 13 March 2019; Published: 9 September 2019
JOURNAL ARTICLE
5 PAGES


Share
SHARE
KEYWORDS
flow field simulation
hydraulic press
Marine engineering
structural characteristics
water control system
RIGHTS & PERMISSIONS
Get copyright permission
Back to Top