Open Access
How to translate text using browser tools
20 December 2012 The Caudal Vertebral Series in Abelisaurid Dinosaurs
Ariel H. Méndez
Author Affiliations +

The caudal vertebrae of abelisaurid theropods show notable variations in the shape of the transverse process, among other characters, and these distinguish the two subclasses Brachyrostra and Carnotaurini. The vertebrae in the proximal third of the tail in abelisaurids, especially derived taxa, show adaptations that provide considerable rigidity, when compared to other theropod dinosaurs, especially Maniraptora, which have highly flexible tails. This continues the considerable rigidity in the neck, trunk, and sacral region in abelisaurids, and is consistent with the hypothesis that South American abelisaurids evolved in isolation from those that inhabited India and Madagascar.


Abelisaurid theropods are the best-known carnivorous dinosaur group from Gondwana. The record of this clade includes more than 10 recognized species, some of which are exceptionally well preserved, like Carnotaurus sastrei (Bonaparte 1985), Majungasaurus crenatissimus (Sampson et al. 1998), Aucasaurus garridoi (Coria et al. 2002), and Skorpiovenator bustingorryi (Canale et al. 2009).

Although much of the detailed morphological description on the clade thus far has focused on cranial morphology, vertebral anatomy has received increased attention. Several researchers (e.g., Bonaparte et al. 1990; Coria et al. 2002; O'Connor 2007; Méndez 2010, in press) have detailed axial anatomy and provided valuable information regarding vertebral morphology in Abelisauridae, documenting a number of features that differentiate members of this group from other theropods. Included among these features are: hypertrophied cervical epipophyses, elongated cervical rib shafts, increased fusion of elements into the sacral complex, caudal vertebrae with long transverse processes, and expanded distal ends of transverse processes in caudal vertebrae (Bonaparte et al. 1990; Bonaparte 1991; Coria and Salgado 1998; Coria et al. 2002; Rauhut et al. 2003; O'Connor 2007; Méndez 2010, in press).

Bonaparte, Novas, and Coria (1990) described the vertebral morphology of Carnotaurus sastrei, documenting for the first time the remarkable features of abelisaurids, that were hitherto unknown in other theropod dinosaurs. Subsequent to this work, additional discoveries of abelisaurids from South America (Coria and Salgado 1998; Coria et al. 2002; Kellner and Campos 2002; Calvo et al. 2004; Martínez et al. 2004; Rauhut et al. 2003; Novas et al. 2008; Canale et al. 2009; Ezcurra and Méndez 2009) and other former Gondwanan landmasses such as Madagascar (Sampson et al. 1998; O'Connor 2007), and India (Wilson et al. 2003; Novas et al. 2010) added significantly to our knowledge of abelisaurid vertebral morphology.

In this work I provide a detailed comparison of the caudal vertebral series of abelisaurids. The aim is to document the different morphologies present in the tail of abelisaurids in relation to other theropods, in addition to denoting the trends and specific differences observed within the group. I further highlight the phylogenetic value of certain of these features.

Institutional abbreviations.—DGM, Departamento Nacional da Produção Mineral, Rio de Janeiro, Brasil; FMNH, Field Museum of Natural History, Chicago, USA; GSI, Geological Survey of India, Kolkata, India; ISIR, Geology Museum, Indian Statistical Institute, Kolkata, India; MACN, Museo Argentino de Ciencias Naturales “Bernardino Rivadavia”, Buenos Aires, Argentina; MCF, Museo Municipal “Carmen Funes”, Plaza Huincul, Neuquén, Argentina; MMCH, Museo Municipal “Ernesto Bachmann”, Villa El Chocón, Neuquén, Argentina; MPEF, Museo Paleontológico “Egidio Feruglio”, Trelew, Chubut, Argentina; MPM, Museo Regional Provincial “Padre Manuel Jesús Molina”, Santa Cruz, Argentina; MUPC, Museo de la Universidad Nacional del Comahue, Neuquén, Argentina; UA, Département de Paléontologie, Université d'Antananarivo, Antananarivo, Madagascar.

Other abbreviations.—CL, length of the vertebral centrum; TPL, transverse processes.

Material and methods

Caudal vertebral remains of the following specimens were compared: Aucasaurus garridoi (MCF-PVPH-236), Carnotaurus sastrei (MACN-PV-CH 894), Ekrixinatosaurus novasi (MUPCv-294), Ilokelesia aguadagrandensis (MCF PVPH-35), Majungasaurus crenatissimus (UA 8678; FMNH PR 2100), Pycnonemosaurus nevesi (DGM 859-R), Rahiolisaurus gujaratensis (ISIR 408–429, 518–545), Rajasaurus narmadensis (GSI 21141), Skorpiovenator bustingorryi (MMCH-PV 48), and three specimens of Abelisauridae indet. (MPM-99, MPEF V 1699, and MACN-PV-RN 1012).

Description and comparisons

There are no complete caudal series from any known abelisaurid, although several specimens preserve at least partial remains. Articulated caudal vertebrae are present in Carnotaurus (caudals 1–7), Majungasaurus (caudals 1–5 and 5–29; following O'Connor 2007), Aucasaurus (caudals 1–13) and Skorpiovenator (caudals 1–13, although this material still remains to be completely prepared for a detailed comparison). The tail has been divided into three sections, anterior (caudals 1 to 10), middle (caudals 11 to 16), and posterior (caudals 17 to the end). This division is arbitrary and is based on certain modifications that are observed along the caudal series. Its validity may only extend to the abelisaurids.

Anterior caudal vertebrae (Fig. 1).—The anterior caudal vertebrae are most common (ten caudal vertebrae in Majungasaurus, Aucasaurus, and Skorpiovenator, eight in Carnotaurus, three in Ekrixinatosaurus and Abelisauridae indet. (MPM-99), two in Pycnonemosaurus and Abelisauridea indet. (MPEF-V-1699), and one in Rajasaurus, Rahiolisaurus, and Abelisauridae indet. (MACN-RN-1012).

The vertebral centra are amphicoelous, almost higher than long, medially compressed, thus presenting the typical spool-shape. In lateral view, the first four caudal vertebrae exhibit a slightly concave anterior margin, whereas the posterior one is convex, as seen in Carnotaurus, Aucasaurus, Majungasaurus, Ekrixinatosaurus, Rajasaurus, Rahiolisaurus, MPEF-V-1699, MPM-99, and MACN-RN-1012 (Fig. 1). The remainder of the anterior caudal vertebrae (caudals 5–10) exhibit straight margins.

Fig. 1.

Anterior caudal vertebrae of abelisaurids. A. Majungasaurus crenatissimus Déperet, 1896 (UA 8678) from Maastrichtian; Madagascar. B. Abelisauridae indet. (MPM-99) from Turonian; Patagonia. C. Abelisauridae indet. (MPEF-V 1699) from Hauterivian—Barremian; Patagonia. D. Ekrixinatosaurus novasi Calvo, Rubilar-Roger, and Moreno, 2004 (MUCPv 294) from Cenomanian; Patagonia. E. Abelisauridae indet. (MACN-PV-RN 1012) from Santonian; Patagonia. F. Carnotaurus sastrei Bonaparte, 1985 (MACN-CH 894) from Maastrichtian; Patagonia. G. Aucasaurus garridoi Coria, Chiappe, and Dingus, 2002 (MCF-PVPH 236) from Campanian; Patagonia, in anterior (A1–G1) and lateral (A2–G2) views. Scale bars 5 cm.


The ventral surface of anterior caudal vertebrae of Aucasaurus, Majungasaurus, MPM-99, MPEF-V-1699, and MACN-RN-1012 exhibit a longitudinal groove, whereas in Ekrixinatosaurus and Rajasaurus the ventral surface of the centrum exhibits a keel. In Carnotaurus, the ventral surface is too damaged to recognize either of the above mentioned features. The sides of the anterior caudal centra do not have any pneumatic features, although in Carnotaurus, Aucasaurus, and Ekrixinatosaurus they do exhibit a slight depression.

Regarding the neural arch, transverse processes exhibit both size and shape features that are characteristic of abelisaurids. For example, Rauhut et al. (2003) observed that the length of the transverse processes (TPL) relative to the length of the vertebral centrum (CL) exhibits a higher ratio than in other groups of carnivorous dinosaurs. The TPL/ CL ratio is greater than 1.3 in Carnotaurus, Aucasaurus, Majungasaurus, Skorpiovenator, Ekrixinatosaurus, MPM-99, MPEF-V-1699, and MACN-RN-1012 (Table 1). This ratio is less than 1.3 in Masiakasaurus and Ceratosaurus, and is close to unity in Allosaurus. The ventral surface of the transverse processes of anterior caudal vertebrae of abelisaurids (e.g., Carnotaurus, Aucasaurus, Majungasaurus, Ekrixinatosaurus, Skorpiovenator, Rahiolisaurus, MPM-99, MPEF-V-1699, MACN-RN-1012) exhibit a centrodiapophyseal lamina (Fig. 2A). This lamina is present in Masiakasaurus (Carrano et al. 2002), but not in Allosaurus or Ceratosaurus. There is also a bony ridge on the ventral surface of the distal end of the transverse processes (Fig. 2B) that run in an anteroposterior direction. This ridge is present in Carnotaurus, Aucasaurus, Ekrixinatosaurus, MACN-RN-1012, and possibly in Skorpiovenator, although in the latter the state of preservation does not allow absolute confirmation (Juan Canale, personal communication 2012). This structure was identified by Ezcurra and Méndez (2009) and might be the same as that proposed by Carrano et al. (2011) and used by Persons and Currie (2011) to differentiate the transverse process from the caudal rib. The distal end of the transverse processes presents a remarkable fan-shaped expansion in most abelisaurids, including Carnotaurus, Aucasaurus, Ekrixinatosaurus, Pycnonemosaurus, Skorpiovenator, MPM-99, MPEF-V-1699, and MACN-RN-1012. In Rahiolisaurus the distal ends are broken so it is unknown if these exhibit the expanded condition. In Majungasaurus, the transverse processes are not distally expanded, a condition similar to that in Masiakasaurus, Ceratosaurus, and Allosaurus. In relation to the distal expansion of the transverse processes, an anterior projection (Fig. 2C) can be observed in Carnotaurus, Aucasaurus, Ekrixinatosaurus, MPM-99, and MACN-RN-1012. In MPEF-V-1699 this feature is not visible due to the poor state of preservation of this part of the transverse process. The external margin of the transverse processes is convex in Carnotaurus, Aucasaurus, and MACN-RN-1012, and straight in Majungasaurus, Ekrixinatosaurus, Pycnonemosaurus, and MPM-99.

Fig. 2.

Detail of several features of abelisaurid caudal vertebrae. A. Centrodiapophyseal lamina of Ekrixinatosaurus novasi Calvo, Rubilar-Roger, and Moreno, 2004 (MUCPv 294) from Cenomanian; Patagonia. B. Bony ridge in ventrodistal end of transverse process of MACN-PV-RN-1012 from Santonian; Patagonia. C. Expanded distal end of transverse process with anterior projection of Aucasaurus garridoi Coria, Chiappe, and Dingus, 2002 (MCF-PVPH 236) from Campanian; Patagonia. Hyposphene (D) and hypantrum (E) of Carnotaurus sastrei Bonaparte, 1985 (MACN-CH 894) from Maastrichtian; Patagonia. Scale bars 5 cm.


The position of the transverse processes with respect to the horizontal plane is another distinctive feature of certain abelisaurids. In Carnotaurus, Aucasaurus, Ekrixinatosaurus, and MACN-RN-1012 the angle is greater than 40°. In Pycnonemosaurus, Skorpiovenator, MPEF-V-1699, and MPM-99 the degree of inclination is ∼ 30°, whereas in Majungasaurus and Rahiolisaurus it is lower at ∼ 20°. Another outstanding feature of anterior caudal neural aches is the presence of the accessory hyposphene-hypantrum articulations (Fig. 2D, E), a characteristic of Carnotaurus, Aucasaurus, Ekrixinatosaurus, Pycnonemosaurus, MPM-99, and MACN-PV-RN-1012. This feature is not present in the anterior caudal vertebrae of Majungasaurus nor in the basal tetanuran Allosaurus, although it is present in Masiakasaurus (Carrano et al. 2011) and Ceratosaurus (Madsen and Welles 2000).

Middle caudal vertebrae (Fig. 3).—Vertebrae belonging to the middle section of the tail are preserved in Majungasaurus, Aucasaurus, Ekrixinatosaurus, Ilokelesia, and Rahiolisaurus. The mid-caudal vertebrae of these abelisaurids are distinguished by having amphicoelous and elongated centra (almost twice the height of the centrum), with subcircular articular surfaces, as well as facets to articulate with the haemal arches and a clearly marked ventral concavity in lateral view. These features are also present in the mid-caudal vertebrae of Masiakasaurus, Ceratosaurus, and Allosaurus, except that in the first two genera the articular surfaces are slightly ovoid. The transverse processes of the mid-caudal vertebrae in Aucasaurus, Ekrixinatosaurus, and Ilokelesia are well developed and, as in the anterior caudals, have expanded ends. Rahiolisaurus also exhibits well-developed transverse processes without expanded distal ends. In Majungasaurus the transverse processes are less developed than in preceding vertebrae with distal ends that taper.

Table 1.

Measurements of caudal vertebrae in Abelisauridae (in cm). Abbreviations: CL, maximum length of centrum; ACW, width of anterior articular surface; ACH, height of anterior articular surface; PCW, width of posterior articular surface; PCH, height of posterior articular surface; TH, total height; CL/PCH, maximum length of centrum/ height of posterior articular surface; NSH, height of neural spine; NSL, length of neural spine; NSW, width of neural spine; TPL, transverse process length; TPL/CL, transverse process length/maximum length of centrum; MCW, width of medial part of centrum; * measures underestimated by damage or deformation; — missing data. 1 The measurements of Majungasaurus were taken from O'Connor (2007).




The distal expansion in Aucasaurus exhibits the same anterior projection observed in the anterior caudals, whereas Ekrixinatosaurus and Ilokelesia exhibit distal expansion in both anterior and posterior directions. In contrast to preceding caudal vertebrae, where the base of the transverse process is nearly as wide as the length of the centrum, the transverse processes are narrower. The position of the transverse process along the anteroposterior axis of the neural arch also varies, being located in the middle part of the vertebra in Aucasaurus, Ekrixinatosaurus, Ilokelesia, Ceratosaurus, and Allosaurus. The transverse process is positioned more posteriorly in Majungasaurus (and Masiakasaurus) being locatedin the posterior half of the vertebra. The prezygapophysis in the mid-caudals is slightly elongated and extends beyond the anterior edge of the centrum, less than 1/4 of its length, as in Masiakasaurus, Ceratosaurus, and Allosaurus. It is also quite robust and gently sloping dorsally. The postzygapophysis in Majungasaurus, Aucasaurus, Ekrixinatosaurus, and Ilokelesia, as in Masiakasaurus, Ceratosaurus, and Allosaurus, is located on the posterior margin of the centrum and its posterior projection is not very pronounced. In all abelisaurids the neural spine is located in the posterior half of the vertebra, as is in the mid-caudals of Masiakasaurus, Ceratosaurus, and Allosaurus.

Fig. 3.

Middle caudal vertebrae of abelisaurids. A. Majungasaurus crenatissimus Déperet, 1896 (FMNH PR 2100) from Maastrichtian; Madagascar. B. Ekrixinatosaurus novasi Calvo, Rubilar-Roger, and Moreno, 2004 (MUCPv 294) from Cenomanian; Patagonia. C. Aucasaurus garridoi Coria, Chiappe, and Dingus, 2002 (MCF-PVPH 236) from Campanian; Patagonia, in lateral (A1–C1) and dorsal (A2–C2) views. Scale bars 5 cm.


Posterior caudal vertebrae (Fig. 4).—Posterior caudal vertebrae have been described only in Majungasaurus (O'Connor 2007) and Rahiolisaurus (Novas et al. 2010). These vertebrae are amphicoelous, with very elongated centra. The length is twice the height, this ratio being even higher in the more posterior caudals, and the articular surfaces are subcircular in outline. The ventral facets that articulate with the haemal arches remain distinctive, as they were in previous caudal vertebrae. In Majungasaurus, there is a slight ventral ridge that cannot be called a well-defined keel, whereas in Rahiolisaurus the ventral surface is flat. On the lateral surface of the vertebral body, there is a depression just below a longitudinal ridge that appears to be a vestige of the transverse process. Most of these features of the centrum are also observed in the vertebral centra of the posterior caudals of Masiakasaurus, Ceratosaurus, and Allosaurus, suggesting that this part of the caudal appendage retains more plesiomorphic characters that the anterior and middle portion of the tail, although in Masiakasaurus the elongation of the centrum is three times the height.

Fig. 4.

Posterior caudal vertebra of Majungasaurus crenatissimus Déperet, 1896 (FMNH PR 2100) from Maastrichtian; Madagascar, in lateral (A), dorsal (B), and anterior (C) views. Scale bar 5 cm.


The development of the neural arch in the posterior caudal vertebrae of Majungasaurus begins at approximately 1.5 times the height of the centrum and decreases to half that height in the last caudal segments. The prezygapophysis is projected anterodorsally, surpassing the anterior margin of the vertebral body by 50% of its length (O'Connor 2007), similar to that in Masiakasaurus (Carrano et al. 2002), and Allosaurus (Madsen 1976). The facet of the prezygapophysis is located anterior to the anterior margin of the centrum in the posterior caudals, unlike the condition in the mid-caudals, where the prezygapophyseal facet is located on the front edge of the centrum (O'Connor 2007). This morphology is very different from the posterior caudals of Ceratosaurus in which the anterior projection of the prezygapophysis and the prezygapophyseal facet are positioned immediately dorsal to the anterior margin of the centrum. The postzygapophysis is projected posteriorly between 15 to 25% of the length of the centrum, whereas in Masiakasaurus, Ceratosaurus, and Allosaurus this projection is almost nonexistent. The neural spine in the posterior caudal vertebrae of Majungasaurus is laminar as in Ceratosaurus, and decreases in height more caudally along the series. In the posterior region of the tail, the neural spine becomes gradually elongate and short, such that it spans approximately half the length of the centrum. This is also observed in Masiakasaurus and differs from the posterior caudals of Ceratosaurus and Allosaurus in which the neural spine is positioned over the posterior half of the centrum.


Abelisaurid caudal characters

Previous authors have recognized several apomorphies in the caudal vertebrae of abelisauroids (Bonaparte 1991; Bonaparte et al. 1990; Coria and Salgado 1998; Coria et al. 2002; Rauhut et al. 2003; Canale et al. 2009; Ezcurra and Méndez 2009). However, at least within Theropoda, vertebral characters are not yet decisive for phylogenetic analyses. The detailed review of morphological features in the caudal vertebrae indicated diagnostic features of Abelisauridae and less inclusive clades (e.g., Brachyrostra, Carnotaurini). The few phylogenetic analyses that have included the clade Abelisauridae (Carrano and Sampson 2008; Canale et al. 2009) improved their resolution when data from detailed morphological analysis of the vertebral column were included (Méndez 2010, unpublished data). In this regard, derived features of Abelisauroidea, and lesser inclusive clades are discussed below.

Length of the transverse process in anterior caudal vertebrae.—The length of the transverse process in relation to the length of their respective vertebral body is a character proposed by Rauhut et al. (2003). In representative theropods (e.g., Dilophosaurus, Allosaurus) the TVP/CL ratio ranges from 1 to 1.1. TVP/CL increases in Ceratosaurus (Madsen and Welles 2000) to values ranging between 1.1 and 1.3. Finally, the abelisaurids Carnotaurus, Majungasaurus, Aucasaurus, Ekrixinatosaurus, Skorpiovenator, Pycnonemosaurus, MPM-99, MACN-PV-RN-1012, and MPEF-V-1699 exhibit much longer transverse processes in relation to the centrum, this ratio being greater than 1.3 (see Table 1).

Centrodiapophyseal lamina in anterior and mid-caudal vertebrae.—This feature was first proposed by Rauhut et al. (2003). The presence of a centrodiapophyseal lamina in anterior and mid-caudal vertebrae is a character shared by Carnotaurus, Majungasaurus (O'Connor 2007), Aucasaurus (Coria et al. 2002), Ekrixinatosaurus (Calvo et al. 2004), Skorpiovenator (Canale et al. 2009), Ilokelesia (Coria and Salgado 1998), Pycnonemosaurus (Kellner and Campos 2002), MPM-99 (Martínez et al. 2004), MACN-PV-RN-1012 (Ezcurra and Méndez 2009) and MPEF-V-1699 (Rauhut et al. 2003). Carrano et al. (2002) also identify this lamina in Masiakasaurus. This feature has not been documented in any other group of theropods and could be considered a synapomorphy of Abelisauroidea.

Accessory articulation hyposphene-hypantrum in anterior and mid-caudal vertebrae.—This feature was first proposed by Coria et al. (2002). The presence of a well defined hyposphene in anterior and middle caudal vertebrae is a feature exhibited by the abelisaurids Carnotaurus, Aucasaurus, Ekrixinatosaurus, Skorpiovenator, Pycnonemosaurus, MPM-99, MACN-PV-RN-1012, and MPEF-V-1699. However, this feature is not present in other abelisaurids such as Ilokelesia and Majungasaurus, nor in the abelisauroid Elaphrosaurus, the tetanuran Allosaurus and Herrerasaurus. It should be noted that the hyposphene-hypantrum articulation is not a unique feature within Abelisauridae since it is also present in Masiakasaurus, Ceratosaurus, and Dilophosaurus.

Expansion and projection of the transverse processes in anterior and mid-caudal vertebrae.—This feature was first proposed by Coria and Salgado (1998). The transverse processes in the anterior and mid-caudals of the abelisaurids Carnotaurus, Aucasaurus, Ekrixinatosaurus, Skorpiovenator, Pycnonemosaurus, MPM-99, MACN-PV-RN-1012, and MPEF-V-1699 are characterized by a marked expansion of the distal end and an anterior projection of same. In Ilokelesia this expansion is present but the projection is not only anterior but also posterior. This expansion and projection of the distal end of the transverse process is not present in Majungasaurus or in other theropods.

Ventrodistal bony ridge in the distal end of the transverse processes in anterior caudal vertebrae.—This feature was first proposed by Ezcurra and Méndez (2009). The ventral surface of the transverse processes in the abelisaurids Carnotaurus, Aucasaurus, Ekrixinatosaurus, and MACN-PV-RN-1012 presents a bony ridge at its distal end. This character has not been observed in the abelisaurids Majungasaurus, Ilokelesia and Pycnonemosaurus, nor in any other theropod (e.g., Ceratosaurus, Elaphrosaurus, Masiakasaurus, Allosaurus, Dilophosaurus).

Fig. 5.

Distribution of selected caudal vertebral characters in recent phylogenetic analysis (Modified from Canale et al. 2009).


Orientation angle of the transverse processes with respect to the horizontal in anterior caudal vertebrae.—This feature was proposed by Bonaparte et al. (1990). The transverse processes in caudal vertebrae tend to be located on the horizontal plane in Herrerasaurus and Dilophosaurus, which could be considered the ancestral condition for this character. In other theropods (e.g., Allosaurus, Ceratosaurus) the transverse processes of anterior caudal vertebrae exhibit a slight dorsal inclination not exceeding 20°, as in Majungasaurus. Other abelisaurids present a dorsal inclination of the transverse processes of approximately 30° (i.e., Pycnonemosaurus, Skorpiovenator, MPM-99, MPEF-V-1699). However, in the anterior caudal vertebrae of Carnotaurus, Aucasaurus, Ekrixinatosaurus, and MACN-PV-RN-1012, this feature becomes more extreme, reaching inclinations of at least 40°.

External margin of the transverse processes on caudal vertebrae.—This feature was proposed by Canale et al. (2009). The external edge of the transverse processes of caudal vertebrae is straight in basal theropods (e.g., Dilophosaurus and Ceratosaurus) and also in the noasaurid Masiakasaurus (Carrano et al. 2002) and the abelisaurids Majungasaurus, Ekrixinatosaurus, Pycnonemosaurus, and MPM -99, in what could be considered the plesiomorphic condition of this character. Ilokelesia shows a particular morphology of the external edge of the transverse process, being notably concave. On the other hand, a convex external margin seems to be distinctive of Carnotaurini (i.e., Carnotaurus, Aucasaurus, MACN-PV-RN-1012).

Most of the characters present in the abelisaurid caudal series allow an accurate identification of the less inclusive groups Brachyrostra (Canale et al. 2009) and Carnotaurini (Coria et al. 2002: fig. 5). This would imply a greater degree of specialization in this sector of the vertebral column within more derivatives abelisaurids.

Function of the abelisaurid tail

The peculiar morphology of the caudal series of abelisaurid theropods probably gave it functional properties that have not been observed in other theropods. As observed by Méndez (2010), and Persons and Currie (2011), the first third of the caudal appendage of the abelisaurids, in particular the most derived (e.g., Carnotaurus, Aucasaurus), is characterized by features that promote the structural rigidity of this region of the tail (i.e., presence of accessory articulation hyposphene-hypantrum, expanded distal end of transverse processes, presence of centrodiapophyseal lamina). The presence, in most members of this group, of a slender anterior projection on the transverse processes that contacts, at least in Carnotaurus and Aucasaurus with the transverse process of the preceding caudal vertebra is also linked with this stiffness. Moreover, in Aucasaurus the cranial projections of the transverse processes of caudal 1 contact the caudal ends of both ilia (Coria et al. 2002). Although not preserved in the holotype of Carnotaurus, moulds of its transverse processes associated with skin patches indicate that the condition described before for Aucasaurus is also present in Carnotaurus (Coria et al. 2002). In Aucasaurus the awl-like projections of its transverse processes laterally embrace the ilia. Although these projections are not preserved in the first caudals of Carnotaurus, notches for their reception are visible on the lateral surface of the dorsocaudal corner of the ilia (Coria et al. 2002). This evolutionary trend contrasts with the theropods on the line to birds. In derived maniraptorans (e.g., dromaeosaurids and birds) the base of the tail was highly movable and the distal 2/3 was stiffened by longitudinal tendons (Gatesy 2001).

Abelisaurids have a set of specialized vertebral features that probably had a close functional relationship. The rigidity proposed for the anterior third of the tail of the more derivatives abelisaurids, would be the culmination of a long and quite stiff axis that starts with a robust neck dominated by hypertrophied epipophyses and well-developed cervical ribs (O'Connor 2007; Méndez in press). This is followed by a dorsal sector whose vertebrae have accessory articulations (hyposphene-hypantrum) to increase structural rigidity, and a sacral region composed of firmly fused vertebrae. All these modifications result in a vertebral axis with little flexibility between the base of the neck and the first third of the caudal appendage (Méndez in press).

The unique morphology of the vertebral structures in the tail of abelisaurids may suggest a rearrangement of the muscles (Persons and Currie 2011). The increase of the available space below the transverse processes for muscle attachment, and the extreme development of the transverse processes, may have favoured greater development of some muscles (e.g., M. caudofemoralis and M. ilio-ischiocaudalis) at the expense of others (e.g., M. spinalis and M. longissimus), thus modifying the capability to perform certain movements. (Persons and Currie 2011).


The tail of abelisaurid theropods evolved differently from the rest of carnivorous dinosaurs. This region presents a particular morphology that distinguishes it clearly from other theropods. This evolutionary strategy could result in a functional benefit by allowing further development of the musculature associated with cursoriality, providing an adaptive advantage to compete with other contemporary meat-eaters (i.e., carcharodontosaurids, coelurosaurians). This detailed study of caudal morphology has revealed diagnostic characters of the family Abelisauridae, and also of less inclusive clades, such as Brachyrostra and Carnotaurini.


I thank Fernando Novas (MACN) and Juan Canale (MMCH) for providing invaluable comments; Alejandro Kramarz (MACN), Ariana Carabajal (MCF), Juan Porfiri (Centro Paleontológico Lago Barreales, Neuquén, Argentina), and Juan Canale for allowing the study of material under their care; and Patrick O'Connor (Ohio University, Ohio, USA), Fernando Novas, and Rubén Martínez (Universidad San Juan Bosco, Comodoro Rivadavia, Argentina) for providing photographs of Majungasaurus, Pycnonemosaurus, and MPM-99, respectively, Cristina Garat (Bariloche, Argentina) and Michael J. Benton (School of Earth Sciences, University of Bristol, Bristol, UK) who kindly helped me with the writing in English. I thank Patrick O'Connor and Rodolfo Coria (Universidad Nacional de Río Negro, General Roca, Argentina) for the useful comments that improved the quality of this contribution. This work represents part of my Ph.D. thesis completed at the Argentino de Ciencias Naturales “Bernardino Rivadavia”, Buenos Aires, Argentina. I thank CONICET for providing financial support.



J.F. Bonaparte 1985. A horned Cretaceous carnosaur from Patagonia. National Geographic Research 1: 140–151. Google Scholar


J.F. Bonaparte 1991. The Gondwanan theropod families Abelisauridae and Noasauridae. Historical Biology 5: 1–25. Google Scholar


J.F. Bonaparte , F.E. Novas , and R.A. Coria 1990. Carnotaurus sastrei Bonaparte, the horned, lightly built carnosaur from the Middle Cretaceous of Patagonia. Contributions in Science, Natural History Museum of Los Angeles County 416: 1–42. Google Scholar


J.O. Calvo , D. Rubilar-Roger , and K. Moreno 2004. A new Abelisauridae (Dinosauria: Theropoda) from northwest Patagonia. Ameghiniana 41: 555–563. Google Scholar


J.I. Canale , C.A. Scanferla , F.L. Agnolín , and F.E. Novas 2009. New carnivorous dinosaur from the Late Cretaceous of NW Patagonia and the evolution of abelisaurid theropods. Naturwissenschaften 96: 409–414. Google Scholar


M.T. Carrano and S.D. Sampson 2008 The phylogeny of Ceratosauria (Dinosauria: Theropoda). Journal of Systematic Palaeontology 6: 183–236. Google Scholar


M.T. Carrano , M.A. Loewen , and J.J.W. Sertich 2011. New materials of Masiakasaurus knopfleri Sampson, Carrano and Forster 2001, and implications for the morphology of the Noasauridae (Theropoda: Ceratosauria). Smithsonian Contributions to Paleobiology 95: 1–53. Google Scholar


M.T. Carrano , S.D. Sampson , and C.A. Forster 2002. The osteology of Masiakasaurus knopfleri, a small abelisauroid (Dinosauria: Theropoda) from the Late Cretaceous of Madagascar. Journal of Vertebrate Paleontology 22: 510–534. Google Scholar


R.A. Coria , L.M. Chiappe , and Dingus L . 2002. A new close relative of Carnotaurus sastrei Bonaparte 1985 (Theropoda: Abelisauridae) from the Late Cretaceous of Patagonia. Journal of Vertebrate Paleontology 22: 460–465. Google Scholar


R.A. Coria and L. Salgado 1998. A basal Abelisauria Novas, 1992 (Theropoda—Ceratosauria) from the Cretaceous of Patagonia, Argentina. Gaia 15: 89–102. Google Scholar


C. Depéret 1896. Sur l'existence de dinosauriens sauropodes et théropodes dans le Crétacé supérieur de Madagascar. Comptes Rendus de l'Academie des Sciences, Paris 122: 483–485. Google Scholar


M.D. Ezcurra and A.H. Méndez 2009. First report of a derived abelisaurid theropod from the Bajo de la Carpa Formation (Late Cretaceous), Patagonia, Argentina. Bulletin of Geosciences 84: 547–554. Google Scholar


S.M. Gatesy 2001. The evolutionary history of the theropod caudal locomotor module. In : J. Gauthier and J.F. Gall (eds.), New Perspectives on the Origin and Early Evolution of Birds , 333–350. Peabody Museum of Natural History, New Haven. Google Scholar


A.W.A. Kellner and D.A. Campos 2002. On a theropod dinosaur (Abelisauria) from the continental Cretaceous of Brazil. Arquivos do Museu Nacional 60: 163–170. Google Scholar


J.H. Madsen 1976. Allosaurus fragilis: A revised osteology. Utah Geological Survey Bulletin 109: 1–163. Google Scholar


J.H. Madsen and S.P. Welles 2000. Ceratosaurus (Dinosauria, Theropoda) a revised osteology. Miscellaneous Publications of the Utah Geological Survey 00–2: 1–80. Google Scholar


R. Martínez , F.E. Novas , and A. Ambrosio 2004. Abelisaurid remains (Theropoda, Ceratosauria) from southern Patagonia. Ameghiniana 41: 577–585. Google Scholar


A. H. Méndez 2010. Estudio anatómico, filogenètico y funcional de la columna vertebral de los terópodos abelisáuridos (Dinosauria, Theropoda, Ceratosauria). 423 pp. Unpublished Ph.D. thesis, Universidad de Buenos Aires. Google Scholar


A.H. Méndez (in press). The cervical vertebrae of the Late Cretaceous abelisaurid dinosaur Carnotaurus sastrei. Acta Palaeontologica PolonicaGoogle Scholar


F.E. Novas , I.S. Carvalho , L.C. Borges Ribeiro , and A.H. Méndez 2008. First abelisaurid bone remains from the Maastrichtian Marillia Formation, Bauru Basin, Brazil. Cretaceous Research 29: 625–635. Google Scholar


F.E. Novas , S. Chatterjee , D.K. Rudra , and P.M. Datta 2010. Rahiolisaurus gujaratensis, n. gen. n. sp., a new abelisaurid theropod from the Late Cretaceous of India. In : S. Bandyopadhyay (ed.), New Aspects of Mesozoic Biodiversity , 45–62. Springer, Berlin. Google Scholar


P.M. O'Connor 2007. The postcranial axial skeleton of Majungasaurus crenatissimus (Theropoda: Abelisauridae) from the Late Cretaceous of Madagascar. Society of Vertebrate Paleontology, Memoir 8: 127–162. Google Scholar


W.S. Persons IV and P.J. Currie 2011. Dinosaur speed demon: The caudal musculature of Carnotaurus sastrei and implications for the evolution of South American abelisaurids. PLoS ONE 6 (10): e25763. Google Scholar


O.W.M. Rauhut , G. Cladera , P. Vickers-Rich , and T.H. Rich 2003. Dinosaur remains from the Lower Cretaceous of the Chubut Group, Argentina. Cretaceous Research 24: 487–497. Google Scholar


S.D. Sampson , L.M. Witmer , C.A. Forster , D.W. Krause , P.M. O'Connor , P. Dodson , and F. Ravoavy 1998. Predatory dinosaur remains from Madagascar: implications for the Cretaceous biogeography of Gondwana. Science 280: 1048–1051. Google Scholar


J.A. Wilson , P.C. Sereno , S. Srivastava , D.K. Bhatt , A. Khosla , and A. Sahni 2003. A new abelisaurid (Dinosauria, Theropoda) from the Lameta Formation (Cretaceous, Maastrichtian) of India. Contributions from the Museum of Paleontology, University of Michigan 31: 1–42. Google Scholar
© 2014 A.H. Méndez. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Ariel H. Méndez "The Caudal Vertebral Series in Abelisaurid Dinosaurs," Acta Palaeontologica Polonica 59(1), 99-107, (20 December 2012).
Received: 24 August 2012; Accepted: 5 December 2012; Published: 20 December 2012
caudal vertebrae
functional morphology
tail morphology
Back to Top