BioOne.org will be down briefly for maintenance on 14 May 2025 between 18:00-22:00 Pacific Time US. We apologize for any inconvenience.
How to translate text using browser tools
20 December 2024 Overtopping Assessment of a Rubble Mound Breakwater with Innovative Armor Units: A Physical and Numerical Study
Elisa Leone, Antonio Francone, Andrea Paglialunga, Francesco Ciardulli, Jijun Long, Andrea Aloisi, Giuseppe Roberto Tomasicchio
Author Affiliations +
Abstract

Leone, E.; Francone, A.; Paglialunga, A.; Ciardulli, F.; Aloisi, A., and Tomasicchio, G.R., 2024. Overtopping assessment of a rubble mound breakwater with innovative armor units: a physical and numerical study. In: Phillips, M.R.; Al-Naemi, S., and Duarte, C.M. (eds.), Coastlines under Global Change: Proceedings from the International Coastal Symposium (ICS) 2024 (Doha, Qatar). Journal of Coastal Research, Special Issue No. 113, pp. 804-808. Charlotte (North Carolina), ISSN 0749-0208.

Rubble-mound breakwaters are essential for coastal defense, protecting ports and mitigating erosion. During storms, water overflow can cause circulating currents in protected zones. Integrating innovative armor units that efficiently dissipate energy is key in reducing wave overtopping. An experimental investigation has been conducted on a scaled model of a rubble-mound breakwater with innovative armor units at the EUMER (EUropean Maritime Environmental Research) laboratory, University of Salento, Italy. The model replicated a defense structure in the Arabian Gulf, protecting an artificial island. A critical section prone to overtopping has been built at a 1:15 model scale. The investigation analyzed the performance of the armor units in terms of wave overtopping under operational and extreme conditions, considering the Gulf's wave characteristics. To enhance reliability, the physical model investigation has been complemented by a numerical study. Numerical simulations have been performed using the OpenFoam C++ libraries and the IHFOAM multiphase flow solver. The VARANS equations solved the two-phase flow within the breakwater's porous media. To close the system of equations describing the turbulent flow, the k-ω SST turbulence model has been selected, due to the good trade-off between cost and accuracy. The VOF method has been applied to track the free surface elevation over time. The numerical simulations showed strong agreement with experimental observations, demonstrating IHFOAM as a reliable tool to predict wave overtopping phenomena.

Elisa Leone, Antonio Francone, Andrea Paglialunga, Francesco Ciardulli, Jijun Long, Andrea Aloisi, and Giuseppe Roberto Tomasicchio "Overtopping Assessment of a Rubble Mound Breakwater with Innovative Armor Units: A Physical and Numerical Study," Journal of Coastal Research 113(sp1), 804-808, (20 December 2024). https://doi.org/10.2112/JCR-SI113-158.1
Received: 23 June 2024; Accepted: 30 July 2024; Published: 20 December 2024
KEYWORDS
CFD
Rubble-mound breakwater
sea-level rise
Wave overtopping
RIGHTS & PERMISSIONS
Get copyright permission
Back to Top